Deutsch
Aluminium foil/strips
EN AW-5251 / EN AW-Al Mg2Mn0,3
| Material | EN AW-5251 / EN AW-Al Mg2Mn0,3 according to DIN EN 573-3:2009-08 | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Article number |
UWAL 2100
Product group 5251
Material XX
Hardness XXXX
Thickness XXXXXX
Width |
||||||||||||||||||||
| Material conditions | H18 hard / H24 semi-hard / O soft (other hardnesses upon request) according to DIN 485-2 or DIN 546-2 depending on strip thickness |
||||||||||||||||||||
| Properties |
|
||||||||||||||||||||
| Surface | Front and back side: mill finished | ||||||||||||||||||||
| Strip thicknesses | Foil: 0.050 to 0.200 mm according to DIN 546 Strips: 0.200 to 15.000 mm according to DIN 485 |
||||||||||||||||||||
| Strip widths | 10 – 1500 mm | ||||||||||||||||||||
| Burrs | unprocessed, burr-free, rolled, or rounded edge, edge radius, full radius | ||||||||||||||||||||
| Inner diameter | 150, 300, 400, 500 mm; depends on thickness; with and without sleeve | ||||||||||||||||||||
| Outer diameter | max. 2000 mm | ||||||||||||||||||||
| Coil weights | according to customer request; run lengths also available | ||||||||||||||||||||
| Packaging | up to 200 mm wide: vertical strip axis (eye to sky) from 201 mm wide: horizontal strip axis (eye to wall) on Euro / coil pallets or according to customer request |
The data in this technical product information is based on our current knowledge and experience. Due to the abundance of possible influences during its application, it does not release the processor nor the user from performing their own tests and trials. A legally binding guarantee of certain properties or of suitability for a specific purpose cannot be derived from our information. Depending on the individual case, we recommend consulting with us. Any property rights and existing laws must be observed by the recipient of our products under their own responsibility.